Quote:
Originally Posted by TulsaSky
When you put the top up make sure the pins are lined up at the bottom of the top frame, the part the slides into the rubber boot at the edge of the door. Kind of hard to explain but if the top is not seated at the bottom then the window will not seal and you will get a wind noise. While Teri aka Skybaby was here in town she put the top up and WAIT the passenger side I need to make sure its seated or pins are in place, Maverick and I both went WOW ours are the same way! Before you latch the top in look at that rubber boot and move the top with you hand and adjust it so once its latched the plastic tab is in place seated. May help to look at the drivers side then walk around to the passenger and make sure its in the exact same place if its off you should see a difference.
TulsaSky
 |
Any chance you could post some pictures?