Well, I wasn't going to say anything cause I love my WR. However, I bought one of the last ones that were created by the founder Robert. Unfortunately after a little over a year mine at first warped in this Florida heat, then cracked and then finally breaking off at both ends..
Altho i could of removed it, i did not because of the fact that it was an "original".. and has, (and still does) have sentimental value to me. For now ima gonna hang it up in my garage and light it up once in awhile. Once i saw what was happening, Stephen took care of me and created a V2 for us with the same design that Robert found, all exactly the same only a V2. I also had issues and worries of the rubber seal on the truck either breaking or warping, and that it did (warp & bent up wards), also it IS harder to close the trunk AND it does not pop up as it should when you hit the tops FOB switch. After removing the V1, all went back to normal, and I'm happy to report that even tho the rubber seal is bent, I have not had any water leaks or tears on the rubber seals. If it gets worse, I'll have my boys just replace that front part of the seal if it becomes needed. BTW, once I installed the V1, I never ever removed it, it was, or I wanted it to be a permanent install, unfortunately, that did not work out...
PS: BTW, the stuff being used to secure the V2 is NOT velcro, it is something much more permanent if you will, and in fact I told Robert about this stuff when we talked about the fact that he was developing a V2 and needed a material that can hold it in place without drilling holes. I suggested to him to check out this stuff called "Super Lock". Rat Shack, errr, Radio shack sells the stuff in black OR in a clear material. Once these 2 babies are secured and pressed together, in many cases you need a screw driver to pry them apart, at least with the black ones... we'll see how they hold up in our heat down here... hmm, wife asked me when I was going to install the V2... I told her soon...
