Dual Horn Photos

**JohnD** · 04-19-2008, 07:51 PM

I installed a Fiam high-tone horn on SPIRIT a while back, and never posted photos of the mount. So here they are...

The factory horn mounts on the passenger side. The add-on horn goes in the same spot on the driver side. I just spliced into the wires for the factory horn and ran them across the front to the other side for the high-tone horn. It looks perfectly balanced, and it sounds great! (I might be upgrading to the Opel horn to sound a little more European - I have to see how that sounds first.)

The photos below show the factory horn on the left, and the add-on horn on the right. Also shown is the product card from the package showing the exact model that I installed...

So this is a win all the way around... better tone, twice as loud, looks great, and easy to do!

Barry · 04-19-2008, 09:12 PM

Youv'e been busy...I might do this one.

**Skip** · 04-19-2008, 09:21 PM

I have been thinking about putting in another horn. I am down rite tired of screaming out the windder ...Get the blank out of my way....Skip...

Sky_Pilot · 04-19-2008, 10:35 PM

HA! I thought you added one from the looking at the Opel grill swap. Did you add a relay for the horn set? Are they the 130dB horns?

**Celt03** · 04-19-2008, 11:23 PM

I ordered the very same Fiam Freeway Blaster high-tone horn and Hubby installed it for me a couple of weeks ago.
He did a really good job and now my Saffy no longer sounds like a kiddie car.

**JohnD** · 04-20-2008, 02:29 AM

Quote:

Originally Posted by Sky_Pilot

HA! I thought you added one from the looking at the Opel grill swap. Did you add a relay for the horn set? Are they the 130dB horns?

The fact sheet says this is a 132db horn. I did not add a relay - just spliced into the existing wires.

bronzestarsky · 04-20-2008, 04:00 PM

Did the same thing...installed the hi/lo Fiamm 132db Freeway Blasters, but put them on the same side as the stock horn:

In case the pic doesn't show, here's the link:

Horns2a - SaturnFans Photo Forums

Just remember to install them with the flutes pointing down, so water doesn't get trapped inside. No relay needed, just spliced into the existing horn wire, and hooked it up to both horns. It's a tight fit, but as the pic shows, it can be done.

GaryH · 04-20-2008, 08:45 PM

Quote:

Originally Posted by bronzestarsky

Did the same thing...installed the hi/lo Fiamm 132db Freeway Blasters, but put them on the same side as the stock horn:

In case the pic doesn't show, here's the link:

Horns2a - SaturnFans Photo Forums

Just remember to install them with the flutes pointing down, so water doesn't get trapped inside. No relay needed, just spliced into the existing horn wire, and hooked it up to both horns. It's a tight fit, but as the pic shows, it can be done.

I installed mine on the same side also. Put both horns on with the same bolt that held the original horn.

RealGomer · 08-18-2008, 11:50 AM

bronzestarsky - Did you need any special brackets or clamps? MY Batsky's tooter died recently. Probably something to do with some recent storms and high water on the XWay.

GaryH · 08-18-2008, 12:27 PM

Quote:

Originally Posted by RealGomer

bronzestarsky - Did you need any special brackets or clamps? MY Batsky's tooter died recently. Probably something to do with some recent storms and high water on the XWay.

The bracket came with the horn.

SteveSky67 · 08-18-2008, 03:05 PM

one of the Massc members put it on for me, it had to go on the other side of the car becuase it was redline, but still works great...

04-19-2008, 07:51 PM	#1 (permalink)
JohnD First 2000 Sr. Member Join Date: Apr 2006 Location: SoCal Posts: 3,477 My Photos: (73)	Dual Horn Photos I installed a Fiam high-tone horn on SPIRIT a while back, and never posted photos of the mount. So here they are... The factory horn mounts on the passenger side. The add-on horn goes in the same spot on the driver side. I just spliced into the wires for the factory horn and ran them across the front to the other side for the high-tone horn. It looks perfectly balanced, and it sounds great! (I might be upgrading to the Opel horn to sound a little more European - I have to see how that sounds first.) The photos below show the factory horn on the left, and the add-on horn on the right. Also shown is the product card from the package showing the exact model that I installed... So this is a win all the way around... better tone, twice as loud, looks great, and easy to do! Attached Thumbnails __________________ First:"BABY"* Silver Pearl 9 May 06* Then:"SPIRIT"* Black Onyx Red Line 25 Oct 06* Check out My Photos!

04-19-2008, 09:12 PM	#2 (permalink)
Barry First 2000 Sr. Member Join Date: Feb 2005 Location: Spring Hill Fl Posts: 595 My Photos: (49)	Youv'e been busy...I might do this one. __________________ I See Red Lines 08 Sky Red Line Silver - 12-16-07 07 Ion 07 Sky Red Line Silver - 9-22-06 07 Base Sky Silver - 3-06 07 Aura 07 Saturn Outlook XR 06 Saturn Vue 4-04 Ion Red Lines 2-03 EFX Ion Coupes 2-02 EFX SC2 Coupes 2-98 SL2's

04-19-2008, 09:21 PM	#3 (permalink)
Skip First 2000 Sr. Member Join Date: Oct 2005 Location: deep in the land of cotton where good times there are not forgotten Posts: 4,736 My Photos: (0)	I have been thinking about putting in another horn. I am down rite tired of screaming out the windder ...Get the blank out of my way....Skip... __________________ Resident Redneck of the forum and Birthday Greeter Keep on the sunny side of life It tant Christmas without Christ.

04-19-2008, 11:23 PM	#5 (permalink)
Celt03 Senior Member Join Date: Aug 2007 Location: Washington State Posts: 1,574 My Photos: (6)	I ordered the very same Fiam Freeway Blaster high-tone horn and Hubby installed it for me a couple of weeks ago. He did a really good job and now my Saffy no longer sounds like a kiddie car. __________________ "Saffyre" 2008 Midnight Blue RL/Black/Black Leather / 5-spd w/Spoiler Magnaflow 3" Quad tip / Chrome Wheels / On Star / 6 CD XM Monsoon / Splash Guards / GT Antenna / WindRestrictor V2 www.imsaturn.com/profile/Celt

04-20-2008, 04:00 PM	#7 (permalink)
bronzestarsky Senior Member Join Date: Dec 2007 Location: Norfolk, VA Posts: 129 My Photos: (9)	Did the same thing...installed the hi/lo Fiamm 132db Freeway Blasters, but put them on the same side as the stock horn: In case the pic doesn't show, here's the link: Horns2a - SaturnFans Photo Forums Just remember to install them with the flutes pointing down, so water doesn't get trapped inside. No relay needed, just spliced into the existing horn wire, and hooked it up to both horns. It's a tight fit, but as the pic shows, it can be done. __________________ Robert Norfolk, VA 2007 SKY, dark blue, tan top, 5-speed, ltd slip, painted alloys, free-flow muffler, cross-drilled rotors, dual 132db Fiamm horns, Fujita dual-filter cold air intake, stubby antenna, wind deflector, Kappashere reBar

Remove Advertisements Sponsored Links
Saturn Sky Forum Advertisement

04-19-2008, 10:35 PM	#4 (permalink)
Sky_Pilot Senior Member Join Date: Jan 2008 Location: Laguna Niguel, CA Posts: 251 My Photos: (6)	HA! I thought you added one from the looking at the Opel grill swap. Did you add a relay for the horn set? Are they the 130dB horns?

08-18-2008, 11:50 AM	#9 (permalink)
RealGomer Member Join Date: Sep 2006 Posts: 57 My Photos: (0)	bronzestarsky - Did you need any special brackets or clamps? MY Batsky's tooter died recently. Probably something to do with some recent storms and high water on the XWay. __________________ Für Elise – Support the Heart & Breast Cancer Foundations

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode