5th Injector DIY instructions - Page 20

40rty · 01-27-2013, 11:54 PM

Can you be a little more detailistic? Dealing with this as we speak and this setup has been nothing but all hack and I hate being hack. So if LNF'n or whatever his name is kept his **** then where was his rerouted?

Elff · 01-28-2013, 12:19 AM

I went back through Jebs pictures and figured it out.
Very stealth job which is why I missed it.

The stock 2bar Tmap sensor uses 2 bolts to hold it in place.
The bosch 3 bar ones only use 1

Jeb drilled and tapped what used to be just a bolt hole and installed that brass fitting directly to the left of the 3 bar sensor

Bravo!
That looks stock

Elff · 01-28-2013, 02:10 PM

Ok, I just called ATP because I am impatient.
Here is the list of the 4 parts you need from them.
All listed with Web links

Additional Injector Holder Kit
http://www.atpturbo.com/mm5/merchant...de=ATP-FUL-013

Connector / plug for stand EFI injector
http://www.atpturbo.com/mm5/merchant...de=ATP-ACS-013

1/4" NPT to 4AN Flare Male to Male 90 Degree Adapter
http://www.atpturbo.com/mm5/merchant...de=ATP-FTG-141

Oil Feed Line -4 - SS Braid, 1 Foot length
http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-033

The first 2 parts are listed on Page 1, but the last 2 parts did not have direct ATP part numbers.

Hope this helps

Monadzback · 01-28-2013, 03:38 PM

Yup. It looks sweet. Want a pic?

Elff · 01-28-2013, 03:48 PM

There is a pic on the first page of this post.
But
Do you have a link to the Brass fitting you used?
or
The Size threads that go into the Manifold?

Monadzback · 01-28-2013, 07:19 PM

No, just went to an auto parts store and picked some up

Elff · 01-28-2013, 10:02 PM

I ordered my controller today as well as the above 4 items.

Vroompsh · 02-06-2013, 06:52 PM

I'm also jumping on this 5th injector wagon. I've got everything so far except the dvc-30. Still waiting for that to show up.

Elff · 02-06-2013, 08:49 PM

I need the controller and a manifold. Gotta txt 40rty about that.
Devil's own is back ordered

Vroompsh · 02-06-2013, 09:14 PM

I got an email saying shipped. But I'm still waiting for the controller... It was shipped Jan 28th... Taking a little while lol

Vroompsh · 02-07-2013, 12:57 PM

My controller came in today.

Elff · 02-07-2013, 02:14 PM

Cool, Mine should be arriving soon then.

casto · 02-08-2013, 08:29 AM

Hey guy sorry to get off subject I gured you guy's would probably know more about the intake manifold and throttle body than most. Has any one ever used this set up on here?

PROCAR-performance

Elff · 02-08-2013, 09:56 AM

They are a vendor on KP.

They took the exact design of an EVO manifold and sliightly modified it so you can attach a kappa TB to it.
They have not provided any before or after Dyno's to justify their claims and they have also stated they are not willing to pre-setup a 5th injector on it.
Personally, I think you are fine with the stock kappa one.

Elff · 02-08-2013, 10:12 AM

Quick question on the Fuel Injector mount.
Is there an optimal height that this should be?