ugrading clutch

jchao · 04-12-2008, 10:33 AM

I have the Hahns stage II and ready to go to III.
I want to get all the power to the ground...
Do not think that the factory clutch can handle it. Clutch already slipping.

Anyone upgraded their's.

Looking for recommendations

**Skip** · 04-12-2008, 12:46 PM

Quote:

Originally Posted by jchao

I have the Hahns stage II and ready to go to III.
I want to get all the power to the ground...
Do not think that the factory clutch can handle it. Clutch already slipping.

Anyone upgraded their's.

Looking for recommendations

No the factory clutch won't handle it. Search for clutch and Hanh. Someone on the forum has already changed theirs...Skip....

CJsSky · 04-14-2008, 08:00 AM

Quote:

Originally Posted by jchao

I have the Hahns stage II and ready to go to III.
I want to get all the power to the ground...
Do not think that the factory clutch can handle it. Clutch already slipping.

Anyone upgraded their's.

Looking for recommendations

I have a Stage 2 clutch and presure plate only 1000 miles on it. Was to stiff for the miss's. It's a non SAC rated at 350lbs. You will need to change your flywheel. Might as well go to a light weight aluminum.

I will let the clutch go for the right price. Make me an offer if you are interested.

jchao · 04-15-2008, 07:32 PM

Sorry to here this...
I ordered a Stage 2+ from Spec with an Aluminum Flywheel.
There went $900.00.

Good luck selling it..

Thanks for responding

Ernest · 04-15-2008, 09:32 PM

Quote:

Originally Posted by CJsSky

I have a Stage 2 clutch and presure plate only 1000 miles on it. Was to stiff for the miss's. It's a non SAC rated at 350lbs. You will need to change your flywheel. Might as well go to a light weight aluminum.

I will let the clutch go for the right price. Make me an offer if you are interested.

Hey Chris,

I'm changing clutches in Scarlett next week, going to a RAM Dual Disc for the stock pedal feel, got a Centerforce/Macleod Setup with aluminum flywheel that will sitting in my garage for a while

I got tired of the heavy pedal in traffic, and my shifts will be quicker with less effort, while having better holding power than the single disc.

puggsleyssky · 04-15-2008, 09:46 PM

Bill from Hahn told me that I would probably want to change out my stock clutch because of the Hahn stage III that I will be installing soon. Problem is , I,m not sure what to get to replace it. I really won't "race" the car, just wanted more umph, and I really don't want a heavy pedal..... any Ideas??

04-12-2008, 10:33 AM	#1 (permalink)
jchao Member Join Date: Oct 2006 Posts: 63 My Photos: (0)	ugrading clutch I have the Hahns stage II and ready to go to III. I want to get all the power to the ground... Do not think that the factory clutch can handle it. Clutch already slipping. Anyone upgraded their's. Looking for recommendations

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Saturn Sky Forum Advertisement

04-15-2008, 07:32 PM	#4 (permalink)
jchao Member Join Date: Oct 2006 Posts: 63 My Photos: (0)	Sorry to here this... I ordered a Stage 2+ from Spec with an Aluminum Flywheel. There went $900.00. Good luck selling it.. Thanks for responding

04-15-2008, 09:46 PM	#6 (permalink)
puggsleyssky Senior Member Join Date: Oct 2007 Location: Evansville, In. Posts: 228 My Photos: (0)	Bill from Hahn told me that I would probably want to change out my stock clutch because of the Hahn stage III that I will be installing soon. Problem is , I,m not sure what to get to replace it. I really won't "race" the car, just wanted more umph, and I really don't want a heavy pedal..... any Ideas??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)