Saturn Sky Forums: Saturn Sky Forum - View Single Post - Blend Door Actuator replacement
View Single Post
post #14 of (permalink) Old 11-14-2019, 04:59 PM
marlboromike
First 2000 Sr. Member
 
marlboromike's Avatar
 
Join Date: Sep 2005
Location: Bonita Springs, Florida
Posts: 17,258
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Garage
Quote:
Originally Posted by TomatoSoup View Post
Not exactly - there isn't an actuator for the Blower dial. According to the schematics there is the "Left Temperature Actuator", "Right Temperature Actuator" and the "Mode Actuator", but why there are two temp flaps, I don't know. There's a note that says 'Left' means left side of the HVAC module and 'Right' means right side. It also says the Mode Actuator is on the left too.

You now know what I know

UPDATE: I looked at the manual's replacement instructions, and now I know more:



Parts bin strikes again, I guess.

The other thing I noticed is that the repair test shows a 4th actuator - for A/C Re-circulation (which makes sense). Yet that actuator doesn't show up on the schematic as far as I can see. NOPE - it does show there, I just couldn't see it. Age. It's a terrible thing. However that actuator is far more simple (just two positions) so I assume it's a different part number and also looks different to the other three.
All I know is from experiential learning....I just replaced mine following the instructions from that UTUBE video...everything that he OP is experiencing I had....and it was resolved. I cannot say what the OP replaced was the correct actuator...although to replace the other two would be difficult because access in a SKY is more difficult than a Solstice. Just watch the video on a Solstice.
marlboromike is offline  
 
 
For the best viewing experience please update your browser to Google Chrome