For sale 2.4 S/C kit and internals - Saturn Sky Forums: Saturn Sky Forum
Saturn SKY vehicles/parts For Sale/Wanted Place for MEMBERS to post want to buy or vehicles for sale. NO COMMERCIAL POSTING, no PROMOTION OF VEHICLES OR ITEMS YOU DO NOT PERSONALLY OWN.

User Tag List

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 06-06-2018, 06:09 PM Thread Starter
Senior Member
 
RickyD's Avatar
 
Join Date: Aug 2006
Location: Katy TX
Posts: 1,811
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Garage
For sale 2.4 S/C kit and internals

I'm building a LS3 stroker to drop in my Sky so if you look at my signature I'm going to have a lot of stuff for sale.

Custom built Lysholm 1.6L screw supercharger kit (Supercharger, snout unit, two pulleys, custom mounts out of 7075 aluminum, 89mm throttle body, huge inner cooler and full 3 inch tubes with couplers and clamps. $2700.00 (New at least $4500)
L61 cyl head with Non VVT stage III comp cams: $400.00 (New with cams $1530.00)
DDM long tune header. $400.00 (New $800.00)
Ecotec to T56 bellhousing $ 400.00 ( New complete kit with bell housing, trany mount, clutch, and drive shaft is $3150.00)
AEM Meth Injection kit. $200.00 (New $425)
K1 forged rods $200.00 (New $450)
Custom forged Wesco pistons (9.5 compression) NOTE: one may be bad but don't think so, wont know tell I get it out. $200.00 (New $450)

Total is $4500 but if someone wants it all I'll drop it to $4250.00

Then shipping of coarse

Soon to be a LS3 but:
Lysholm 1.6 supercharger
T56 6 speed transmission
2.4 with L61 cyl head
Non VVT comp cams
DDM long tune header.
RK hood & Grnd Effects
DDMWorks suspension mods
AEM Meth Injection kit.
Elect exhaust cutout
VDI Doors

Last edited by RickyD; 06-06-2018 at 06:11 PM.
RickyD is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 09-22-2018, 03:52 PM Thread Starter
Senior Member
 
RickyD's Avatar
 
Join Date: Aug 2006
Location: Katy TX
Posts: 1,811
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Garage
lowered prices

If you look at my signature I'm going to have a lot of stuff for sale.

Custom built Lysholm 1.6L screw supercharger kit (Supercharger, snout unit, two pulleys, custom mounts out of 7075 aluminum, 89mm throttle body, huge inner cooler and full 3 inch tubes with couplers and clamps. $2500.00 (New at least $4500)
L61 cyl head with Non VVT stage III comp cams: $300.00 (New with cams $1530.00)
DDM long tune header. $350.00 (New $800.00)
Ecotec to T56 bellhousing $ SOLD ( New complete kit with bell housing, trany mount, clutch, and drive shaft is $3150.00)
AEM Meth Injection kit. $150.00 (New $425)
K1 forged rods $150.00 (New $450)
Custom forged Wesco pistons (9.5 compression) NOTE: one may be bad but don't think so, wont know tell I get it out. $150.00 (New $450)



Then shipping of coarse

Soon to be a LS3 but:
Lysholm 1.6 supercharger
T56 6 speed transmission
2.4 with L61 cyl head
Non VVT comp cams
DDM long tune header.
RK hood & Grnd Effects
DDMWorks suspension mods
AEM Meth Injection kit.
Elect exhaust cutout
VDI Doors
RickyD is offline  
post #3 of 9 (permalink) Old 09-24-2018, 04:27 AM
Rxu
Member
 
Join Date: Jan 2018
Location: Berkeley, CA
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Couple questions regarding the kit. What psi do you run it on and what is the approximate HP gain you are getting? Also what parts are not included in the kit that you are selling that would be required to complete the build? (manifold, etc.)
Rxu is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 09-24-2018, 07:07 AM Thread Starter
Senior Member
 
RickyD's Avatar
 
Join Date: Aug 2006
Location: Katy TX
Posts: 1,811
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Garage
Quote:
Originally Posted by Rxu View Post
Couple questions regarding the kit. What psi do you run it on and what is the approximate HP gain you are getting? Also what parts are not included in the kit that you are selling that would be required to complete the build? (manifold, etc.)
Hi Rxu
All parts are included. Supercharger, mounts, throttle body, tubes, inner cooler and injectors. The stock intake and exhaust can be used even though I have a header on mine. The boost I was running was around 18 but I’m running a really small pulley. On a stock motor I would use the larger pulley that I’ll send as well. That will put you around 10-11 psi of boost. The kit with that pulley will give you around 100-110HP gain and the throttle response with the big throttle body is crazy fun 😊

Soon to be a LS3 but:
Lysholm 1.6 supercharger
T56 6 speed transmission
2.4 with L61 cyl head
Non VVT comp cams
DDM long tune header.
RK hood & Grnd Effects
DDMWorks suspension mods
AEM Meth Injection kit.
Elect exhaust cutout
VDI Doors
RickyD is offline  
post #5 of 9 (permalink) Old 11-05-2018, 04:24 AM
Rxu
Member
 
Join Date: Jan 2018
Location: Berkeley, CA
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Hey RickyD.

I sent a PM a while back but might have slipped past you. Would the kit be bolt on as sold (as in i can just have a mechanic drop in with little to no fabrication work), or is there significant body work required? I assume power steering will need to be relocated, but are there any AC lines, etc. that need to be rerouted?
Rxu is offline  
post #6 of 9 (permalink) Old 05-21-2019, 01:04 PM Thread Starter
Senior Member
 
RickyD's Avatar
 
Join Date: Aug 2006
Location: Katy TX
Posts: 1,811
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Garage
Lowered prices again, this will be it

If you look at my signature I'm going to have a lot of stuff for sale.

Custom built Lysholm 1.6L screw supercharger kit (Supercharger, snout unit, two pulleys, custom mounts out of 7075 aluminum, 89mm throttle body, huge inner cooler and full 3 inch tubes with couplers and clamps. Will come with Injectors and a tune. $2200.00 (New at least $4500)
L61 cyl head with Non VVT stage III comp cams: $250.00 (New with cams $1530.00)
DDM long tune header. SOLD
Ecotec to T56 bellhousing $ SOLD
AEM Meth Injection kit. $100.00 (New $425)
K1 forged rods $125.00 (New $450)
Custom forged Wesco pistons (9.5 compression) NOTE: one may be bad but don't think so, wont know tell I get it out. $125.00 (New $450)

Soon to be a LS3 but:
Lysholm 1.6 supercharger
T56 6 speed transmission
2.4 with L61 cyl head
Non VVT comp cams
DDM long tune header.
RK hood & Grnd Effects
DDMWorks suspension mods
AEM Meth Injection kit.
Elect exhaust cutout
VDI Doors
RickyD is offline  
post #7 of 9 (permalink) Old 07-26-2019, 04:33 PM
Member
 
Join Date: Sep 2016
Location: Fremont, OH
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Garage
Was there an answer as to how "drop in ready" the SC kit listed here is? Does it require any other mods or parts to get it up and running?
buzzdalf is offline  
post #8 of 9 (permalink) Old 07-26-2019, 05:07 PM
Moderator
 
JohnWR's Avatar
 
Join Date: Aug 2006
Location: Lexington, KY
Posts: 4,717
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Quote:
Originally Posted by buzzdalf View Post
Was there an answer as to how "drop in ready" the SC kit listed here is? Does it require any other mods or parts to get it up and running?
Based on the description, the only parts you should need are new plugs.

I installed a DDM M62 SC kit in my 2.4. Different SC but I suspect the installation is comparable.
The PS reservoir will have to be relocated, requiring two hoses.
There will be some cutting to do in front of the radiator for the IC.
There is a fair amount of disassembly and reassembly to get the brackets and pulleys installed.
There shouldn't be any fabrication.

I'm sure Ricky will correct me if I am wrong.

John
Lexington, KY
Sky NA 2007 Midnight Blue
Sky RL 2008 Carbon Flash - Naked
JohnWR is offline  
post #9 of 9 (permalink) Old 07-26-2019, 06:16 PM
Moderator
 
Join Date: Aug 2018
Posts: 275
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 123 Post(s)
Garage
RickyD - I'm still interested in the AEM Meth Kit.
Amorget is offline  
Reply

  Saturn Sky Forums: Saturn Sky Forum > Other KAPPA, Sky and Small Roadster/RWD Cars > Saturn SKY vehicles/parts For Sale/Wanted

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Saturn Sky Forums: Saturn Sky Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome