|Topic Review (Newest First)|
|08-12-2019 08:37 AM|
It's good to be different with your approach, I don't want my projects to be, just like everyone else does to their car.
A lot of customizing is good for the owner, until you have to sell it one day. Limits your market to who, likes your
changes to the car, willing to accept them, and what if anything they will keep, or change after purchase.
The Go-Pro question: New smart phone w/cameras can be expensive. The Go-Pro line up I just looked at
on the Walmart page & Amazon range in prices and models. $200-400 for some of the newest cams with many
smart phone apps. Without a smart phone, you are limited somewhat here. Mine is an older model, I got as
a Father's Day present several years ago from my daughter. Hero 3 silver. I have since purchased several
add on items, mounts, extra battery, wall charger, etc. Works for me. On my laptop I use VLC media player
for play back of MP4 videos. Again works for my applications here.
Speaking of applications...I did a little application of the right foot down principle yesterday, during my cruise.
Oh boy.. fun in the sun for me. Nice day.. open road, camera running. 2 nice videos at speed... Pen-Mar High Rock
Rd. downhill... Edgemont Rd. at a pretty good clip too. One more backroad adventure of mine in the works
with a new cam mount position, " at road level " in the IC inlet, & backwards view from between the seats,
before my yearly You-Tube posting. Something for my grandson when he goes back to school around Labor Day.
I can hear it now, Wow Jaxson your grandad is a nut, err is cool. Look for 5 new videos to LAC Films soon gang.
Car ran good yesterday. Temps never got above 207, uphill grade heat of the day. Quick on the boost, responsive in
the more " twisty " sections of the asphalt, put a smile on my face, and some interesting videos for my collection.
Most of my runs are slow rolling cruises, the scenery around here, the roads in general for the drivability or
a location of interest to me. These last 2 videos... are not slow cruises!
Now the bad news... upon my return from the fun, my brother tells me we have work to do. An entire fence line
here at the farm, has taken a big hit, half destroyed. Got to go look at today, see what needs to be done to it.
It's always something around here. My last Go-Pro run will have to wait for now.
|08-11-2019 12:45 PM|
but full strength can be achieved with either an LED or incandescent bulb(s)
|08-11-2019 12:21 PM|
Do you notice it putting out less light than the full reverse? or does it not diminish it?
|08-11-2019 12:20 PM|
Also, LAC Sky, what go pro do you use? ive been wanting to get a dash cam/ camera system/ security/ go pro... Something, for a long while. Cant make up my mind on what to do.
And as much as I love some of the new smart cameras, also don't want to spend $300-500 on one.
|08-11-2019 12:20 PM|
|08-11-2019 12:16 PM|
What is the reverse light red you have on there? ive seen a few people with that and haven't been able to find anything. Is that a brake light add on? and where do you get it?
|08-11-2019 12:06 PM|
Originally Posted by Critter View Post
|08-11-2019 12:05 PM|
Originally Posted by LAC Sky View Post
I dyed the tan on the seats. Sand down, black dye, black roseline finish and set. That's a longer project simply for having to remove the seats and slips, but worth it. They don't look the best because the driver seat itself needs replaced(couple rips from before I got it) but they definitely look better than the tan.
The heated seats are modules I ordered off Amazon, ended up very nice(HOT). They are a 7 dial switch for each seat(you can see the dials in the pics next to the passenger airbag light). Easy enough to install. VERY carefully drilled the holes out in the panel for the switches, grounded them under the center arm rest, rand the power under the carpet to the passenger side fuse panel and tapped the open remote fuse. Ran the modules back under the carpet to the cut outs under the seats, installed in seats, good to go. =)
Perfect on a cold night with the top down.
Yes, my color scheme is black with purple accents. Its way more unique and I like to be as different as possible. lol
Of course no one makes anything in purple so I have to do all the lighting and coloring myself. Luckily learned that I can in fact sew cross stitches(Shift boot and steering wheel) and im not terrible with paint(Calipers). And ive been soldering lights into cars for years, so the ac unit was the only scary one. and those you just use T3 bulbs that twist in. MAKE SURE to get a good connection though, because they do not like to stay, then you have to remove the whole dash again to fix them.
|08-11-2019 11:52 AM|
Originally Posted by Amorget View Post
|08-11-2019 11:51 AM|
Originally Posted by Amorget View Post
But its just a cover. The red lenses on the inside are fully enclosed to the back of the fixture, so the only real reason for the outer lense is to prtect the inside ones, and to make it smooth. Personally think it looks better and more unique contoured.
I originally took them off just to do the insides in black, and found that they weren't going to go back together, so I went for it. Got some rubber seal to fix the gap problem around the frame and trunk/fender for looks, and there ya go. Has sort of an old school look up close with the visible rubber seal. I liked it so kept it that way. Need to repaint them since the car body paint didn't do too well with the heating plastic and bubbled. Might try air free vinyl wrap next. We shall see.
All in all, with a little daring, this was a cheap and quick project. Took a couple hours including time for paint to dry.
|08-11-2019 11:49 AM|
|Critter||So, what is the added ‘knob’ on the right side of the dash between steering column and stereo? In the foto it has a copper toned ring of color. Just curious if this is an added control to something or something more mundane like a phone mount. Thanks. I’m a fan of anyone who takes the time to personalize a car to their tastes rather than ‘settle’. Critter|
|08-11-2019 08:36 AM|
Car looks good, your customizing list is extensive. Most people have a hobby, a passion for something entertaining
to them. Some of us... however have a car fixation, the need for speed, or I'll personalize my ride to my own liking,
as our hobby. Tinker with this, little money there, paint that, another weekend messing with something on my car.
* I was out yesterday late afternoon, clean the wheels, undercarriage, rust spots (2) and some cold adult beverages.
2 things that stood out to me...
Dyed seats, door panels, carpet, and dash deeper black(was black and tan). You dyed the original OEM seats? Carpet too?
Heated seats. You changed out the OEM seats, or altered them? Not sure there was an electrical connection for this to happen?
Seems you have a thing.. for purple here. Calipers painted purple. That's a one off customized item I've not seen before.
Photo posting work needs attention. Not to worry Robo or John will fix this... soon for you. I'm not buy a Hans device for
for the forum so I can look at photos... in the vertical position. My neck hurts. lol
* Charging the Go-Pro cam now as I type this. About to take a run this morning, few miles on the car, little video footage
of some back roads around here. Something for the You-Tube account update this month.
Good Luck with your upgrades to your gem.
|08-11-2019 01:26 AM|
|08-11-2019 01:19 AM|
|marlboromike||I am having difficulty turning my neck...I believe u need much help in restoring the car to the original specs....it has no LIFE|
|08-10-2019 10:15 PM|
Very nice looking car!
Be interesting to see how well the lenses come off of the tail lights.
|This thread has more than 15 replies. Click here to review the whole thread.|