Saturn Sky Forum banner

21 - 29 of 29 Posts

·
Registered
Joined
·
215 Posts

A Corvette buddy of mine said these work well too. Made of Delrin. Some sort of resin that won't collapse.
 

·
Premium Member
Joined
·
4,193 Posts
At one time I lowered Punisher till it drug on manhole covers. I raised it from there but . . .

Our street has deep cross road drains. The car drags on them at normal height.

What ever works is great. No one lifts my cars but me. I demount and remount the wheels and transport them to the tire store when necessary. I had a bad experience early on - bent both fenders on the Sol - and just stopped taking it in.
 

·
Premium Member
Joined
·
262 Posts
Word to the wise, for I know there are many of you here, those Jack points listed in the off don't seem right... The lift point started buckling...

113335
 

·
Registered
Joined
·
2,904 Posts
Lift point is NOT a Jacking point. Also, you need to use something to spread the load.

:thumbs:

.
 

·
Premium Member
Joined
·
262 Posts
Lift point is NOT a Jacking point. Also, you need to use something to spread the load.
I used a rubber jack puck. It still distorted the metal. I gave up, and realized the ramps I have will actually work despite the low ground clearance.
 

·
Registered
Joined
·
1,135 Posts
I dont understand why you cannot lift the rear with a jack under the dif.
 
21 - 29 of 29 Posts
Top