Well...that does sound like a fun conversation....lol
Let's not turn this thread into something it shouldn't be, okay? Back on topic...
Owned for one-year Total Investment.
Okay I purchased my Sky in August of 2022 so far here is what I've have invested.
Purchase 2007 Sky Base Silver 5 Sp Man with the two tone Red and Black interior 49950 miles $11500
Had a bad ECM P0606 code replaced the ECM $125
Replaced Upstream and Downstream 02 Sensors (I work in a parts store) $45
Replaced Front and Rear Rotors drilled and slotted with Semi-Metallic Pads. $208
Air filter $15
Wheels and Tires. Original wheels and tires are in very good shape 75% thread left. $1805
Oil and filter were changed at time of purchase. Top in perfect condition. --------
$13698
So there you go should last me years as my DD. now has 54300 miles on it. Ready for an oil change.
![Car Wheel Tire Land vehicle Vehicle]()
Purchase 2007 Sky Base Silver 5 Sp Man with the two tone Red and Black interior 49950 miles $11500
Had a bad ECM P0606 code replaced the ECM $125
Replaced Upstream and Downstream 02 Sensors (I work in a parts store) $45
Replaced Front and Rear Rotors drilled and slotted with Semi-Metallic Pads. $208
Air filter $15
Wheels and Tires. Original wheels and tires are in very good shape 75% thread left. $1805
Oil and filter were changed at time of purchase. Top in perfect condition. --------
$13698
So there you go should last me years as my DD. now has 54300 miles on it. Ready for an oil change.
21 - 23 of 23 Posts
Don't have a tech 2 I'm in the auto parts business and purchased an ECM pre-programmed. Plug and Play. I just purchased a LAUNCH CRP129X Scanner. I need for work. It already paid for itself. I replaced the Right Rear caliper as the piston was broken. Could not spin it in. It would just spin the internal threads were stripped. So I need to reset the Brakes/ABS because they pulled a little bit. After I reset them with the scanner, they work perfect. Plus now have no codes at all. You can do a Key relearn without a tech 2 There's lots of info on how to do it. something like Insert Key turn to on do not start. Leave it for ten minutes then turn off for one minute then repeat three times. The security light will go off. It will start after that. The ECM must be programmed with the VIN and of Couse the year make and model of the car Thru GM
21 - 23 of 23 Posts
