Couple of Questions but Mainly About Dash Lighting AGAIN

Karl Hungus · 2025-09-21T20:46:25-0400

Hi everyone,

I've got my Sky completely torn apart and I keep coming up with more to do!

I took the filters off the guage cluster lights to go from brown to what...lighter brownish white and I now want to do LEDs. I don't however want to solder on my board so...

1. Has anyone tapped into the power wire to the cluster to run a couple LEDs or would I be better off running to an open fuse slot for power?

2. The car is a base w/automatic is the cluster from a Redline w/automatic plug and play?

3. If "Yes" on #2, does anyone have a Redline cluster for less than ebay prices?

Thanks as always!

JohnnyG · 2025-09-22T12:53:18-0400

On the Redline at least, the colour comes mostly from a coating on the back of the gauge face - not just from the bulbs. I replaced the bulbs with LEDs directly on the board and used "Goof Off" to remove the backside of the gauge face (it worked great in the end, but messy!). There is, however, a much easier solution: Black Cat Custom Automotive - Pontiac Solstice Gauge Faces in KMH / LED Lighting Kit

Karl Hungus · 2025-09-22T15:16:57-0400

Thanks @JohnnyG. I love the Black Cat stuff but hate their pricing.

Couple of Questions but Mainly About Dash Lighting AGAIN

Our Vendors

Top Contributors this Month

Recommended Communities